PRESSURE TRANSDUCER Copia

PRESSURE TRANSDUCER Copia

PRESSURE TRANSDUCER Copia
¿Qué te ha parecido?

APPLICATIONS

Pressure transducer made entirely of stainless steel for use in virtually any industrial application where a robust and reliable sensor is required. The 21Y series has an extremely low temperature error. Depending on the application, we can use mPm, Packard, M12 or cable connectors of different characteristics or lengths, the Y series is characterised by its high immunity to electromagnetic fields and meets the CE standard by a factor of 10 with respect to conducted and radiated fields. This series is also very immune to external voltages between box and electrical connection, which is very important when working with frequency converters: the high isolation voltage (300 V) allows these converters to be used in very extreme industrial environments.

VIEW IN CATALOGUE

SERIES

Pressure Controllers
VIEW IN CATALOGUE

Features

  • Pressure ranges: 2 – 1000 bar (all intermediate ranges possible)
  • Overpressure: 2 x pressure range (max. 1100 bar)
  • Output signal: 4-20 Ma
  • Output signal limitation: 3.2 – 22.3 Ma
  • Power supply: 8 – 32 Vdc
  • Load resistance: < (U-8 V) / 0.025 A
  • Frequency limitation: 2 kHz
  • Max. Ambient temperature[ºC]: -40 to +100°C
  • Material in contact with liquid: stainless steel. Aisi-316L
  • Outer seal: Viton
  • Electrical connection: mPm plug (on request) M12 plug, Packard or cable
  • Pressure connection: 1/4 “G male thread (on request) 1/8″, 7/16”-20 UNF male thread and female thread
  • Response time (Power ON): 0-99% < 5ms
  • Insulation: > 10 MΩ at 300 Vdc
  • EMC: AT 61000-6-2:2005 / EC 61000-6-3:2007 / AT 61326-2-3:2006
  • Protection class: IP 65 (mPm plug)
  • Weight: 50 g 1/4″ thread (38 g with 1/8″ thread)
  • Filling oil: Silicone oil