Electric pumps for building services, automatic water distribution with hydropneumatic accumulators, for irrigation, pressure increase in pipe networks and cooling circuits. They function only with clean and chemically non-aggressive liquids.

They can be mounted with the motor shaft in horizontal or vertical position. In the vertical position, the motor is always in the upper part.



  • Pump housing: cast iron
  • Impeller: brass
  • Shaft: Inox Aisi-431
  • Mechanical seal: Carbon/Ceramic
  • Motor protection: IP 44 (IP55 on request)
  • Standard voltage :1x230V-50Hz | 3x230V/400V >4kw | 3x400V/690V >4kw
  • Max. Flow rate [m 3 /h]: 18
  • Max. Height[m]: 96
  • Max. Operating pressure[bar]:10
  • Liquid [ºC]: -15 / +70
  • Max. Ambient temperature[ºC]: +40°C
  • Max. Suction power[m]: 8 with foot valve
  • Installation: Vertical / Horizontal